2.1. Installation of the program "Blitz CallerID Display" for the KX-TD PBX on one PC.
2.1.1. General items of information.
Stations KX-TD 812/1232 with one main block have only 1 universal RS-232 port which is used and for
transfer SMDR, and for programming, and for TAPI-interface. And at certain moment only one function from this
list written above can work.
System of PBX KX-TD 1232 from 2 main blocks has 2 RS-232 ports. But TAPI-interface works only on
RS-232 PBX "Master". For SMDR or Program interface you can use RS-232 on PBX "Slave".
PBX KX-TD 500 has 1 port RS-232 to transfer the information. TAPI-interface works on anyone from
RS-232 ports PBX KX-TD 500. We recommend in case KX-TD 500 to use RS-232 port SMDR for
initialization of TAPI-interface. To solve problem of ports lack RS-232 for PBX KX-TD at initialization of
TAPI-interface or to combine reception on one port RS-232 and SMDR messages and TAPI-interface, we offer the
program of reception SMDR information on TAPI-interface. (Look section 5.
Other CTI applications).
2.1.2. Installation and connection with RS-232 port.
Panasonic KX-TD connects with user's computer and Microsoft TAPI Server is carried out
using RS-232C, with soldering described in the firm documentation on installation PBX Panasonic KX-TD.
This cable is also used to receive the SMDR information and programming PBX KX-TD.
Standard cable for COM port for operation TAPI interface PBX KX-TD doesn't approach. You can make a
suitable cable for work with series PBX KX-TD on the scheme given below.
Soldering the cable RS-232 C
Part 1 (9pins connector)
Port RS-232 C series KX-TD (25 pins)
Port RS-232 C on PC (9 pins)
Part 2 (25 pins connector)
Port RS-232 C series KX-TD (25 pins)
Port RS-232 C on PC (25 pins)
For detailed information about soldering the cable address to the firm documentation on installation PBX
Panasonic KX-TD.
For installation the program on the individual computer and also on the computer in the network you need
to download TSP driver for KX-TD system, and also instructions on its installation (tspinst177.exe,
tspEULA.pdf, tspinstman.pdf, before and after instTP.doc etc.).
Connect PBX systems Panasonic KX-TD to the computer with cable (soldering is pointed above).
Install TSP driver KX-TD ver.1.77 on the computer under OS Windows not older than
98 Second Edition, and check its capacity for work according to the instructions pointed above.
Download the Blitz CallerID Display installation, Setup_Blitz_CallerID_Display.exe.
Run the program of installation Setup_Blitz_CallerID_Display.exe and follow the instructions.
Run Blitz CallerID Display.exe.
2.2. Installation "Blitz CallerID Display" for the KX-TDA PBX on one PC.
2.2.1. General items of information.
To realize TAPI-interface station KX-TDA connected to the computer or through USB port, which is on the
MPR device of PBX KX-TDA, or with computer telephony CTI-LINK* device (KX-TDA 0410), which realizes
interface on standard 10BASE-T. RS-232 port, which is on MPR device, is not used for initialization of
TAPI-interface.
To install "Blitz CallerID Display" for PBX KX-TDA on one computer or on computer in network
with TAPI-interface settings through USB port, you need to download 3-d party TSP and USB drivers
for KX-TDA systems (KX-TDA has 1-st party TSP and USB drivers, which are intended to connect computer's
USB port to system telephone KX-T 7633 or KX-T 7636 through USB adapter KX-T 7601 through
which 1-st party CTI application is realized, for example Panasonic KX-TDA 03050 - PC Phone
KX-TDA 0300 - PC Console), and also the instructions to install them (USBModuleDriverUpgradeMan.pdf,
usb-driver2004_2k.zip or usb-driver2004_2003.zip or usb-driver2004_xp.zip, TDAUSBMUver1005.EXE,
panasonic_kx-tda_tsp_inst21012.exe, tspEULA.pdf, kxtdPBXpinstman.pdf, before and after instTSP.doc etc.).
2.2.2. Installation on one computer with USB port.
In case that you connect through USB cable, first of all you need to install USB driver for
PBX KX-TDA on computer, and then to install 3-d party TSP driver.
Connect PBX systems Panasonic KX-TDA to the computer with USB cable. Install USB driver
for KX-TDA systems under OS Windows for your computer. And then 3-d party TSP driver KX-TDA, and check
its capacity for work according to the instructions pointed above.
Download the Blitz CallerID Display package of installations,
Setup_Blitz_CallerID_Display.exe.
Run the program of installation Setup_Blitz_CallerID_Display exe. Follow the instructions.
Run Blitz CallerID Display.exe and set it to extension line which you need.
2.2.3. Installation on one computer with CTI-LINK device.
CTI-LINK device represents network Ethernet device, intends on a cable "twisted pair category 5", with
RJ45 jack. Thus you need network device installed in the computer, Ethernet Switch 10/100 Tx
and 2 Patch cord cable. If computer directly connected to PBX without
Ethernet Switch 10/100 BASE-T, use UP-LINK cable. If you connect with CTI-LINK device you
need to install 3-d party TSP driver for PBX KX-TDA (you don't need USB driver), and in its
configuration in section "Link parameters" select "LAN connection", then enter the IP address CTI-LINK
device. By default you don't need to change the port number.
In spite of an opportunity to connect any computer in Ethernet network to the CTI-LINK, with PBX KX-TDA
at this moment only one computer can work, that's why if you need to receive the TAPI information on several
computers at once all the same it is required to install and set TAPI Server
(Microsoft TAPI Server or Blitz KXTD TAPI Server). At the same time, beginning from
2.0. ver., TSP driver for PBX KX-TDA is multistation that is TAPI interface can be supported from
several PBX KX-TDA, but only through Ethernet on CTI-LINK cards.
Install computer telephone CTI-LINK* device in the free slot PBX-system Panasonic KX-TDA
(KX-TDA 0410), which realizes interface on standard 10BASE-T. The device has factory settings:
IP address 192.168.0.1, subnet mask 255.255.255.0, port for CTI 33333. Change
this parameters if you need.
Download 3-d party TSP driver for KX-TDA systems, and also the instructions to install it
(panasonic_kx-tda_tsp_inst21012.exe, tspEULA.pdf, kxtdPBXpinstman.pdf, before and after instTSP.doc etc.).
Install 3-d party TSP driver for KX-TDA systems under OS Windows for your computer. Install it, set
it in section "Link Parameters", chosen "LAN connection" and when you entered IP address CTI-LINK
device, check its capacity for work according to the instructions pointed above.
Download the Blitz CallerID Display package of installations,
Setup_Blitz_CallerID_Display.exe.
Run the program of installation Setup_Blitz_CallerID_Display.exe. Follow the instructions.
Run Blitz CallerID Display.exe and set it to extension line which you need.
2.3. Installation on several computers with Blitz KXTD TAPI Server.
Ask your system administrator the address of Blitz KXTD TAPI Server in your local
network.
Connection PBX to the computer which fulfils the Blitz KXTD TAPI Server functions,
installation on it all necessary drivers is made by analog to one of items 2.1.2
, 2.2.2, and 2.2.3. All this and
also its setting are in more detail described on site pages
http://www.blitz-cti.com/software/tapiserver/.
Download the Blitz CallerID Display package of installations,
Setup_Blitz_CallerID_Display.exe.
Run the program of installation Setup Blitz CallerID Display 3.1.exe and follow the
instructions, set it to the EXT line you need.
Run Blitz CallerID Display.exe and set it to receive TAPI information from
Blitz KXTD TAPI Server point its address in network, if it is necessary, by system
administrator's instructions, set the number of port you need.
2.4. Installation on several computers with Microsoft TAPI Server.
Ask your system administrator the address of Microsoft TAPI Server in your local network.
Only Server's versions of Windows have Microsoft TAPI Server. For example:
Windows 2000 Server, Windows Server 2003 etc.
Connection PBX to the computer which fulfils the Microsoft TAPI Server functions,
installation on it all necessary drivers is made by analog to one of items 2.1.2
, 2.2.2 and 2.2.3. All this and
also its setting are in more detail described
on Microsoft site
Download the Blitz CallerID Display package of installations,
Setup_Blitz_CallerID_Display.exe.
Input to the subscriber's computer of extension telephone line (EXT) (computer must be in the same
domain with PC Microsoft TAPI Server) with administrator rights of domain and follow the
Windows instructions install Microsoft TAPI client.
(tcmsetup/c name_Microsoft TAPI Server in the command line).
Run Blitz CallerID Display.exe and follow the instructions.
Restart user's computer under its name and password. Run Blitz CallerID Display.exe and set
it to the extension line you need.
2.5. Removal of the program.
Select "Add/Remove the Programs" in the Windows Control Panel.
Select Blitz CallerID Display in the list of the installed programs and press the button
"Add/Remove the Programs". Follow the instructions.
